The 86290C offers outstanding electrical performance producing > 20 mW swept output over the 2 to 18.6 GHz range along with excellent linearity and low spurious and harmonic content.
Specifications:
Frequency Characteristics:
Range:
Band 1: 2-6.2
Band 2: 6-12.4
Band 3: 12-18.6
Band 4: 2-18.6
Accuracy CW mode (or greater than 100 ms sweep time): (MHz)
Band 1: ±20
Band 2: ±30
Band 3: ±30
Band 4: ±100
All Sweep modes: (MHz)
Band 1: ±30
Band 2: ±40
Band 3: ±40
Band 4: ±80
Output Characteristics:
Maximum Leveled Power: +13 dBm, 2 to 18 GHz
Power Variation: > 10 dBm
Internally leveled: (dB)
Band 1: ±0.7
Band 2: ±0.7
Band 3: ±0.8
Band 4: ±0.9
Residual AM in 100 kHz BW: > 55 dBc
Harmonically related signals: > 25 dBc
Non-Harmonics: > 50 dBc
Impedance: 50 ohms nominal
SWR: < 1.9 internally leveled
RF output connector: type N female (standard)
Modulation Characteristics: RF Blanking On/Off ratio: > 30 dB
External AM:
Input Impeadane: approximately 1000 ohms
Frequency response: typically 300 kHz leveled
Square Wave Response:
On/Off radio: > 30 dB
Symmetry: 40/60
Attenuation for +5 volt input: > 30 dB
Internal AM (1000Hz):
Sqaure-wave On/Off ratio: > 25 dB
External FM:
Maximum Deviations for Modulation Frequencies:
DC to 100 Hz: ±75 MHz
100 Hz to 2 MHz: ±5MHz
Sensitivity:
FM Mode: -20 MHz/V
Phase-Lock Mode: -6 MHz/V
General Specifications
Sweep Time (min): 10 ms single bands. 60 ms on 2 to 18.6 GHz band.
Auxiliary output: rear panel 2 to 6.2 GHz fundamental oscillator output, nominally -10 dBm.
Slope Control: front panel control allowing compensation for frequency dependent test setup losses.
Peak control: front panel control for peaking power over desired frequency range.
Frequency reference output: nom. 1 V/GHz (2-18.6 volts) ±35 mV rear panel BNC output.
|
