|AC Probe used with hp 410C Voltmeter|
|Voltage Range: 0.5 V full scale to 300 V.|
|Accuracy : ±3% of full scale from 100 Hz to 100 MHz.|
|Accuracy : ±10% of full scale, 20 Hz to 100 Hz, 100 MHz to 700 MHz||
The 11036A AC Probe is used with the Model 410C for ac voltage measurements from 20 Hz to 700 MHz.
The voltmeter, with the probe, has an accuracy of ±3% of full scale from 100 Hz to 100 MHz and ±10% of full scale from 20 Hz to 100 Hz and 100 MHz to 700 MHz.
Useable meter indications can be obtained up to 3 GHz. The maximum input voltage for the probe is 30 to 300 volts rms, depending on the frequency of the signal.
Input impedance at low frequencies is greater than 10 megohms shunted by 1.5 picofarads. At high frequencies, input impedance drops due to dielectric losses.