ADF Panel

Strategies
Kit Bashing
All plates need to be trimmed a little to allow easier fitting.

Backplate
Width5.75" (approx 146.05 mm)
Height7 DZUS units (7 x 0.375")
2.625" (approx 66.675 mm)
Backplate Thickness1/16"
Light Plate Thickness1/4" (0.25")
Module Depth???????????????????????????????


Simulator Supplier Parts
Hispa Panels145 x 66 mm
Sismo Soluciones147 x 66 mm
Open Cockpits145 x 65 mm
CockpitSimParts145 x 65 mm


January 2016 prices
SupplierpanelDisplayPartsKnobstotalnotes
Hispa Panels 2922~859 €
Sismo Soluciones-Module 124inclinclincl124 €Assembled
Sismo Soluciones-Panel 24----24 €Panel only
Open Cockpits 2524~8~764 €
CockpitSimParts 2524~8~7£ 64
CPFlight 215inclinclincl215 €Assembled with electronics
PC Flights2725~12~8$ 72Displays need circuit board

STRATEGIES
The Problem :
This panel is already the correct size. The mounting holes are about 1/16" shy of the proper distance, but when enlarging to the larger mounting bolt can be made to fit. Adding one more bolt to the front of the panel eliminates the need for hardware in the mounting rail area.

The existing circuit board needs two holes added for the display cables.

This unit, except as noted, will be left alone.
The photos below show the panel build as supplied by Hispa Panels with my circuit board and the extra panel bolt.
Note the 3 LEDs glued to the back acrylic for lighting the "NAV" on the left edge.

Post Script files for the circuit board

Circuit Board

Circuit Board Mirrored

  • No additional work required
    KIT BASHING